1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
(For more information please refer to our technical information sheet)
Belgium : +32 70 245 245Switzerland : +41 01 251 51 51
2.1. Classification of the substanceor mixture
: No particular risk when handled in accordance with good occupational hygiene
: Presents no particular risk to the environment, provided the recommendations
concerning disposal (see section 13) and any applicable national or localregulations are complied with.
: Not classified as flammable by EC criteria but may present a hazard in the event of
: According to EC criteria, this product is not classified as a "hazardous substance"
- Symbols and indications of danger : : None
8150 Lackland - Saint Louis MO 63114 - USA
3. COMPOSITION / INFORMATION ON INGREDIENTS
: Move the affected person away from the contaminated area and into the fresh air
: Remove all contaminated clothing and footwear
Rinse with plenty of waterIn case of redness or irritation, consult a doctor
: Rinse immediately with plenty of water (for at least 15 minutes).
If irritation persists, consult an eye specialist
Never attempt to induce vomitingConsult a doctor
medical attention and specialtreatment needed
5.2. Special hazards arising from the : Toxic and irritating fumes may be releasedsubstance or mixture
: Do not dispose of fire-fighting water in the environment
Cool down the containers/equipment exposed to heat with a water sprayDo not attempt to fight the fire without suitable protective equipment :- Complete protective clothing- Self-contained breathing apparatus
6.1. Personal precautions, protective : Avoid contact with skin and eyesequipment and emergencyprocedures
8150 Lackland - Saint Louis MO 63114 - USA
6. ACCIDENTAL RELEASE MEASURES (continued)
: Do not allow product to spread into the environment
6.3. Methods and material forcontainment and cleaning up
Remove all sources of ignitionCollect up the product and place it in a spare container suitably labelled
: Wash non-recoverable remainder with large amounts of water
Absorb with:- sand or inert absorbent- vermiculite.
: Dispose of contaminated materials in accordance with current regulations
: Warning : this product can cause the floor to be slippery
: Ensure good ventilation of the work station
Avoid the formation or spread of dust in the atmospherePotential dust explosion hazardRemove all sources of ignition
7.2. Conditions for safe storage,including any incompatibilities
: Does not require any specific or particular technical measures
- the container tightly closed and dry- in a cool, well-ventilated area
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
: Ensure good ventilation of the work station
The protective gloves to be used must comply with the specifications of ECdirective 89/686/EEC and the resultant standard EN 374Breakthrough time : refer to the recommandations of the supplier
8150 Lackland - Saint Louis MO 63114 - USA
8. EXPOSURE CONTROLS / PERSONAL PROTECTION (continued)
9.1. Information on basic physicaland chemical properties
: 5-6 (Aqueous solution - 25 g/l - 20 °C)
: Non oxidizing material according to EC criteria
: To our knowledge, the product does not present any particular risk
: Stable at ambient temperature and under normal conditions of use
: On combustion or on thermal decomposition (pyrolysis) releases :
8150 Lackland - Saint Louis MO 63114 - USA
11.1. Information on toxicologicaleffects
Powdery product. May cause slight irritation to the ocular mucous membranes dueto the presence of a foreign body.
: The dust may be irritating to the respiratory system
: No information available, however this product is not considered to present any
particular risk for the aquatic environment.
: Dispose of in accordance with relevant local regulations
: The user's attention is drawn to the possible existence of specific European,
national or local regulations regarding disposal
8150 Lackland - Saint Louis MO 63114 - USA
: The above regulatory prescriptions are those valid on the date of publication of this
sheet. Given the possible evolution of transport regulations for hazardous materials, incase the date of issue is older than 12 months, compared to the current one, itwould be advisable to check their validity with your commercial agency
environmental regulations/legislationspecific for the substance or mixture
: This product must not be used for other applications that mentionned in §1.
IUCLID (International Uniform Chemical Information Data Base)
: This sheet was updated (refer to the date at the top of this page)
Texts which have been modified since the previous version are marked with anasterisk (*)
6 rue des Boucheries F-60400 NOYONwww.reachelp.comSafety Made Easy with www.lisam.com
This sheet complements the technical sheets but does not replace them. The information given is based on our knowledge of theproduct, at the time of publication. It is given in good faith. Besides, the attention of the user is drawn to the possible risk incurred by using the product for any other use than that for which itwas intended. In no way does this exempt the user from knowing and applying all the regulations controlling his activity. He alone will take on theresponsibility for taking the precautions involved by the use of the product. The aim of all the mandatory regulations mentioned is just to help the user to fulfil his obligations regarding the use of hazardousproducts.
This information must not be considered exhaustive. It does not exempt the user from ensuring that other obligations than thosementioned could apply, related to the storage and use of the product, this being his sole responsibility.
8150 Lackland - Saint Louis MO 63114 - USA
Christopher Siegel, MD, PhD and Juan Sanabria, MD, MSc Although the technical aspects of renal transplantation were first described in the early 1900’s, immunologic barriers to successful renal allotransplantation remained until the 1950’s and 60’s. Several attempts at renal allotransplantation and xenotransplantation were made in the United States, Austria and France before the seminal tr
Ich erkläre hiermit ausdrücklich, dass ich mich bestmöglich an die Anweisungen der die Behandlung Beauty & Mind GmbH ¬ durchführenden Person vor, während und nach der Behandlung halten werde. Ich verstehe, dass die Institut für Ästhetische Dermatologie und Kosmetik Befolgung dieser Anweisungen und die Wiedervorstellung den Sinn haben, zu einem optimalen Schönheit und Gei