1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Mould and Mildew Remover for household use.
LTPTone Industrial EstateMilverton RoadWellingtonSomersetTA21 0ANTel: 01823 666213Fax: 01823 665685
Irritating to skin. Risk of serious damage to eyes. Contact with acids liberates toxic gas. CLASSIFICATION (1999/45)
ENVIRONMENTThe product contains a substance which is very toxic to aquatic organisms. PHYSICAL AND CHEMICAL HAZARDSResultant solution may be highly alkaline and possess a pH of ≥10.5. HUMAN HEALTHSplashes may cause serious eye damage.
The Full Text for all R-Phrases is Displayed in Section 16
GENERAL INFORMATIONNOTE! Effects may be delayed. Keep affected person under observation. INHALATIONMove the exposed person to fresh air at once. Get medical attention if any discomfort continues. INGESTIONImmediately rinse mouth and provide fresh air. Get medical attention if any discomfort continues. SKIN CONTACTRemove affected person from source of contamination. Remove contaminated clothing. Wash the skin immediately with soap and water. Get medical attention if irritation persists after washing. EYE CONTACTCheck for contact lenses which must be removed from the eyes before rinsing. Promptly rinse eyes with plenty of clean water while lifting the eyelids. Continue to rinse for at least 15 minutes. Continue until the eyes are free of all particles. Get medical attention if any discomfort or irritation persists.
EXTINGUISHING MEDIAThis product is not flammable. Use fire-extinguishing media appropriate for surrounding materials. SPECIFIC HAZARDSFire emits clouds of smoke which may contain toxic vapours, gases and fumes. PROTECTIVE MEASURES IN FIREWear self-contained breathing apparatus and full protective clothing. Keep all unnecessary people away. Fire water run-off must not be allowed to contaminate ground or enter drains, sewers or water courses. Provide bunding against fire water run-off.
PERSONAL PRECAUTIONSWear protective clothing (see Section 8). Keep unnecessary people at a safe distance. ENVIRONMENTAL PRECAUTIONSCover all drains and sewers. Avoid spreading spilt material. SPILL CLEAN UP METHODSAbsorb in vermiculite, sand, diatomaceous earth or other absorbent inert material. Place into clearly labelled container for recovery or disposal (see section 13). Rinse site with copious amounts of water, which should not be allowed into drains, sewers or water courses.
USAGE PRECAUTIONSPrevent spilling, skin and eye contact. STORAGE PRECAUTIONSStore in tightly closed original container in a dry, cool and well-ventilated place. Protect from light, including direct sunrays.
PROCESS CONDITIONSProvide eyewash station. ENGINEERING MEASURESProvide adequate general and local exhaust ventilation. RESPIRATORY EQUIPMENTIf ventilation is insufficient, suitable respiratory protection must be provided. HAND PROTECTIONWear protective gloves. After using gloves the hands should be washed and dried thoroughly and a suitable moisturiser applied. EYE PROTECTIONWear dust resistant safety goggles where there is danger of eye contact. HYGIENE MEASURESWash hands after contact. Wash at the end of each work shift and before eating, smoking and using the toilet. Use appropriate skin cream to prevent drying of skin. Promptly remove any clothing that becomes contaminated. Launder clothing before re-use.
STABILITYStable under normal conditions of storage and use. See section 7. CONDITIONS TO AVOIDAvoid heat. HAZARDOUS POLYMERISATIONNone known. MATERIALS TO AVOIDStrong acids. HAZARDOUS DECOMPOSITION PRODUCTSIn fires or in conditions of excessive heat may give off toxic fumes and gases. DANGEROUS REACTIONSAvoid unintended contact with strong acids.
INHALATIONVapours may irritate the respiratory system and cause coughing, asthmatic breathing and breathlessness. INGESTIONMay cause chemical burns in mouth and throat. SKIN CONTACTLiquid may irritate skin. EYE CONTACTMay cause severe irritation to eyes. Risk of serious damage to eyes. TARGET ORGANSEyes Skin
ECOTOXICITYThe product contains substances which are toxic to aquatic organisms and which may cause long term adverse effects in the aquatic environment. MOBILITYThe product is miscible with water. May spread in water systems. BIOACCUMULATIONThe product does not contain any substances expected to be bioaccumulating. DEGRADABILITYThe product is expected to be slowly biodegradable. WATER HAZARD CLASSIFICATIONN/A.
GENERAL INFORMATIONDo not dispose to landfill or in water courses. DISPOSAL METHODSDispose of waste and residues in accordance with local authority requirements. Product is classified as hazardous waste. Disposal of waste material and empty containers must be by means of a licensed waste contractor.
TUNNEL RESTRICTION CODE (E)HAZARD No. (ADR)
Contact with acids liberates toxic gas.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Wear suitable gloves and eye/face protection.
If swallowed, seek medical advice immediately and show this container or label.
Dispose of this material and its container to hazardous or special waste collection point.
If swallowed, rinse mouth with water (only if the person is conscious).
EU DIRECTIVESEC Regulation 1907/2006 (as amended) : 'REACH'. Dangerous Substances DIrective 67/548/EEC. Dangerous Preparations Directive 1999/45/EC. EC Regulation 1272/2008 (as amended): CLP (Classification, labelling and packaging of substances and mixtures). ADR (L’Accord européen relative au transport international des marchandises dangereuses par route.)STATUTORY INSTRUMENTSChemicals (Hazard Information and Packaging for Supply) Regulations 2009 SI No 716. (CHIP4). Control of Substances Hazardous to Health Regulations (as amended). (COSHH)Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2007. (CDG 2009)APPROVED CODE OF PRACTICEApproved classification and labelling guide L131 (Sixth Edition - 2009)The Control of Substances Hazardous to Health Regulations 2002 (as amended). Approved code of practice and guidance. Fifth Edition 2005. HSE Books, or download at: http://www.hse.gov.uk/pubns/priced/l5.pdfGUIDANCE NOTESCOSHH essentials. 'Easy steps to control chemicals.' Only available on HSE's website and regularly updated at www.hse.gov.uk/pubns/guidance/index.htm
Introduction to Local Exhaust Ventilation HS(G)37. Maintenance, examination and testing of local exhaust ventilation HSG154 (HSE 1998). Workplace Exposure Limits EH40/2007
GENERAL INFORMATIONThe surfactant(s) contained in this preparation complies(comply) with the biodegradability criteria as laid down in Regulation (EC) No.648/2004 on detergents. Data to support this assertion are held at the disposal of the competent authorities of the Member States and will be made available to them, at their direct request. REVISION COMMENTSComprehensive revision. GHS information added. REVISION DATE
This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurate and reliable as of the date indicated. However, no warranty guarantee or representation is made to its accuracy, reliability or completeness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.
Information From Your Health Care Provider PROSTATIC HYPERPLASIA, BENIGN BASIC INFORMATION DESCRIPTION Enlargement of the prostate gland. The prostate is about the size of a walnut and is located just below the urinary bladder in men. An enlarged prostate presses against the urethra (tube that carries urine outside) making it narrower. The bladder muscle becomes thicker and more sensit
1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Mould and Mildew Remover for household use.
STABILITYStable under normal conditions of storage and use. See section 7.
TUNNEL RESTRICTION CODE (E)HAZARD No. (ADR)
Contact with acids liberates toxic gas.