Gloi.se

ALiSENSOR™ Level – Operator's Manual
On/Off button
Red and green LED
Serial No.
Connector for charging
LED Status Indication
LED Color
Function
Flashing
Charging
Flashing
Battery alert
Battery power less than 10%
Shut down
Button pressed for Off. Also when Bluetooth connection has been lost for 5
minutes.
Flashing
Connecting
Connected
Greed/Red
Charging
Charging in progress while the unit is off
1. Turn on the ALiSENSOR™ Level by pressing the On/Off button. The green LED will light up.
2. In the Bluetooth-settings of the iOS unit, connect to the ALiSENSOR™ Level device by pressing the corresponding serial number. The blue LED lights up.
3. Start the app on the iOS unit. The app will communicate with the ALiSENSOR™ Level.
4. Perform the measurement.
5. Turn off the ALiSENSOR™ Level unit by pressing and holding the On/Off button until the green LED turns red, approximately 2 seconds. The ALISENSOR™
Level unit will automatically shut down after 5 minutes if the app is not running or the device have no Bluetooth® connection.
6. To charge the ALiSENSOR™ Level unit, plug in the accompanying micro-USB cable to the unit and attach the other end of the cable to any USB socket. The
LEDs will indicate charging status according to the list above.
Technical Specifications
Angle range pitch:
Resolution pitch:
Angle range roll:
Resolution roll:
Battery type:
Lithium Polymer
Connector for charging:
Micro USB
Charging voltage:
4,75 to 5,25 Volt (USB 2.0)
Time to full charge:
Operating time:
Warm up time:
15 minutes
Material:
ABS, anodized aluminum
190g (6,7 ounces)
Care and Cleaning
Keep your ALiSENSOR™ within acceptable temperatures.
The ALiSENSOR™ contains Lithium Polymer battery. Do not expose the device to extreme heat.
Do not charge the device at temperatures below +4°C (40°F) or above +45°C (113°F).
Keep the outside of your ALiSENSOR™ clean.
Use a soft, slightly damp, lint-free cloth. Avoid getting moisture in connector openings.
Do not drop or disassemble the device.
Never attempt to repair or modify the device yourself.
GLOi AB participate in the ”Made for iPod” (MFi) program and as such develops, manufactures and sell products with the ”Made for iPod”, ”Made for iPhone” and/or
”Made for iPad” compatibility logo indicating that the product is fully integrated in the iOS platform.
Direction of conformity
Warranty
The ALiSENSOR™ Level complies with and has been tested according to EMC
This limited warranty begins on the original date of purchase, is valid only to the
directive: SS-EN 61326-1:2006 class B equipment
original purchaser of this product. To receive warranty service, the purchaser
must contact GLOi AB for problem determination and service procedures.
• Do not operate the ALiSENSOR™ around explosive liquids, gases, or vapors.
Warranty service can only be performed by GLOi AB. The original dated bill of sale
must be presented upon request as proof of purchase to GLOi AB.
Disclaimer
GLOi AB will repair or replace this product, at our option and at no charge as
GLOi AB will take no responsibility of damaged property or equipment as a result
stipulated herein, with new or reconditioned parts or products if found to be
of the use of any ALiSENSOR™ device.
defective during the limited warranty period specified above. All replaced parts
and products become the property of GLOi AB and must be returned to GLOi AB.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic
accessory has been designed to connect specifically to iPod, iPhone, or iPad,
GLOi AB will pay all expenses for labor and materials for all repairs covered by this
respectively, and has been certified by the developer to meet Apple performance
warranty. If necessary repairs are not covered by this warranty, or if a product is
standards.
examined which is not in need of repair, you will be charged for the repairs or
examination. The owner must pay any shipping charges incurred in getting your
Apple is not responsible for the operation of this device or its compliance with
GLOi AB product to GLOi AB. GLOi AB will pay reasonable return shipping charges
safety and regulatory standards. Please note that the use of this accessory with
to the owner of the product.
iPod, iPhone, or iPad may affect wireless performance.
Your GLOi AB warranty covers all defects in material and workmanship with the
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. iPad,
following specified exceptions: (1) damage caused by accident, unreasonable use
iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and
or neglect (including the lack of reasonable and necessary maintenance); (2)
other countries.
damage occurring during shipment (claims must be presented to the carrier); (3)
damage to, or deterioration of, any accessory or decorative surface; (4) damage
All trademarks and patents are acknowledged. For further information about this
resulting from failure to follow instructions contained in your owner’s manual; (5)
device and the products we have designed, You are welcome to visit us at:
damage resulting from the performance of repairs or alterations by someone other
than an authorized GLOi AB; (6) units used for other than home use (7)
applications and uses that this product was not intended for (8) the products
inability to receive a signal due to any source of interference. This warranty
Åbäcksgatan 6B
covers only actual defects within the product itself, and does not cover the cost of
installation or removal from a fixed installation, normal set-up or adjustments,
Mölndal
claims based on misrepresentation by the seller or performance variations
resulting from installation-related circumstances.
GLOi AB will not assume liability for incidental, consequential, punitive, or other
similar damages associated with the operation or malfunction of this product. This
product is not to be used for medical purposes or for public information. This
product is not a toy. Keep out of children’s reach.
All rights reserved. This handbook must not be reproduced in any form, even in
excerpts, or duplicated or processed using electronic, mechanical or chemical
procedures without written permission of the publisher. This handbook may
contain mistakes and printing errors. The information in this handbook is regularly
checked and corrections made in the next issue. We accept no liability for
technical mistakes or printing errors, or their consequences.

Source: http://www.gloi.se/downloads/level/LevelManualEn.pdf