D03pvc 1.3

nag_pde_parab_1d_euler_osher (d03pvc) calculates a numerical flux function using Osher’s ApproximateRiemann Solver for the Euler equations in conservative form. It is designed primarily for use with theupwindschemes requiring numerical flux functions.
#include <nag.h>#include <nagd03.h> void nag_pde_parab_1d_euler_osher (const nag_pde_parab_1d_euler_osher (d03pvc) calculates a numerical flux function at a single spatial point usingOsher’s Approximate Riemann Solver (see Hemker and Spekreijse (1986) and Pennington and Berzins(1994)) for the Euler equations (for a perfect gas) in conservative form. You must supply the left and rightsolution values at the point where the numerical flux is required, i.e., the initial left and right states of theRiemann solution values are derived automatically from the solution values at adjacent spatial points and supplied tothe function argument numflx from which you may call nag_pde_parab_1d_euler_osher (d03pvc).
The Euler equations for a perfect gas in conservative form are: where  is the density, m is the momentum, e is the specific total energy, and is the (constant) ratio ofspecific heats. The pressure p is given by ð L; URÞÞ, where U ¼ UL and U ¼ UR are the left and right solution values, and ð Þ arising from the similarity solution U y with U and F as in and initial piecewise constant values U ¼ U L for y < 0 and U ¼ U R for y > 0.
The spatial domain is À1 < y < 1, where y ¼ 0 is the point at which the numerical flux is required.
Osher’s solver carries out an integration along a path in the phase space of U consisting of subpaths whichare piecewise parallel to the eigenvectors of the Jacobian of the PDE system. There are two variants of theOsher solver termed O (original) and P (physical), which differ in the order in which the subpaths aretaken.
The P-variant is generally more efficient, but in some rare cases may fail (see Hemker and Spekreijse (1986) for details). The arwhich variant is to be used. The algorithm forOsher’s solver for the Euler equations is given in detail in the Appendix of Pennington and Berzins (1994).
Hemker P W and Spekreijse S P (1986) Multiple grid and Osher’s scheme for the efficient solution of thesteady Euler equations Applied Numerical Mathematics 2 475–493 Pennington S V and Berzins M (1994) New NAG Library software for first-order partial differentialequations ACM Trans. Math. Softw. 20 63–99 Quirk J J (1994) A contribution to the great Riemann solver debate Internat. J. Numer. Methods Fluids 18555–574 On entry: ulefti À 1Š must contain the left value of the component U i, for i ¼ 1; 2; 3. That is,uleft0Š must contain the left value of , uleft1Š must contain the left value of m and uleft2Š mustcontain the left value of e.
½0Š ! 0:0;Left pressure, pl ! 0:0, where pl is calculated using On entry: urighti À 1Š must contain the right value of the component U i, for i ¼ 1; 2; 3. That is,uright0Š must contain the right value of , ½1Š must contain the right value of m anduright2Š must contain the right value of e.
uright0Š ! 0:0;Right pressure, pr ! 0:0, where pr is calculated using On entry: the ratio of specific heats, .
On entry: the variant of the Osher scheme.
Constraint: path ¼ Nag_OsherOriginal or Nag_OsherPhysical.
On exit: fluxi À 1Š contains the numerical flux component ^ defined type (see Essential Introduction).
contain data concerning the computation required by nag_pde_parab_1d_euler_osher(d03pvc) as passed through to numflx from one of the integrator functions nag_pde_parab_1d_cdshould not change the The NAG error argument (see the Essential Introduction).
An internal error has occurred in this function. Check the function call and any array sizes. If thecall is correct then please consult NAG for assistance.
Left pressure value pl < 0:0: pl ¼ value On entry, uright0Š < 0:0: uright0Š ¼ value Right pressure value pr < 0:0: pr ¼ value nag_pde_parab_1d_euler_osher (d03pvc) performs an exact calculation of the Osher numerical fluxfunction, and so the result will be accurate to machine precision.
nag_pde_parab_1d_euler_osher (d03pvc) must only be used to calculate the numerical flux for the Eulerequations in exactly the form given by with ulefti À 1Š and urighti À 1Š containing the left and rightvalues of ; m and e, for i ¼ 1; 2; 3, respectively. It should be noted that Osher’s scheme, in common withall Riemann solvers, may be unsuitable for some problems (see Quirk (1994) for examples). The timetaken depends on the input the left and right solution values, since inclusion of eachsubpath depends on the signs of the eigenvalues. In general this cannot be determined in advance.
  • Advice on Replacement Calls for Withdrawn/Superseded Routines
  • Implementation-specific Information
  • c05 - Roots of One or More Transcendental Equations
  • d02 - Ordinary Differential Equations
  • e04 - Minimizing or Maximizing a Function
  • f06 - Linear Algebra Support Functions
  • f08 - Least-squares and Eigenvalue Problems (LAPACK)
  • g01 - Simple Calculations on Statistical Data
  • g02 - Correlation and Regression Analysis
  • s - Approximations of Special Functions

    Source: http://www.nag.co.uk/numeric/cl/nagdoc_cl08/pdf/D03/d03pvc.pdf

    Microsoft word - dentalmedical_history.doc

    PATIENT REGISTRATION Responsible Party: (if someone other than the patient) First Name:____________________________ Last Name:______________________________ Middle Initial:___ Address:__________________________________________ Address 2:_________________________________ City, State, Zip:__________________________________________________ Pager:_______________________ Home Phone:____________

    Réponse de m

    090814 Découper la Ville par quartier pour la grippe Question de Monsieur le Conseiller L. Parmentier Dans la problématique de l’application sur le terrain du Plan pandémie fédérale de la grippe mexicaine, les bourgmestres sont contactés pour adapter la stratégie fédérale à la situation locale. Les autorités fédérales ont demandé aux communes d’être prêtes. Les gouvernemen

  • Copyright © 2011-2018 Health Abstracts